Independent guide. We are not an electrician or electrical contractor, we do not do electrical work and we are not for hire. Ohio licenses electrical contractors, and the City of Akron requires contractors to register for permit work. Check any electrician before you hire them · Ohio license lookup

Akron Electrician GuideIndependent guide for Akron and Summit County, Ohio · not an electrician

Start here › Costs

What electrical work costs in Akron

Checked November 16, 2026 · independent guide, not an electrician

Cost pages for electricians usually blur two kinds of number: what a contractor charges, which no public body publishes, and what the government charges, which is public. This page keeps them apart. The labor and project ranges below are national figures from Angi, because this guide found no published source with Akron-specific electrician prices. The permit fees are Akron's actual fees, from the County of Summit's published schedule.

National labor rates (Angi, 2026)

Angi reports a national average of $351 to hire an electrician in 2026, based on 101,757 projects reported by its pros. Most homeowners pay $163 to $538. Small jobs average about $85 and complex ones about $1,152. (Angi, How Much Does an Electrician Cost)

The same page gives these national hourly figures:

Electrician level National hourly rate, 2026
Apprentice $40 to $60
Journeyperson $60 to $90
Master $90 to $120
Typical overall $50 to $100, first hour about $150

Angi also says electricians usually charge a minimum of one to four hours, and that night and weekend emergency calls add $100 to $200 or more. (Angi)

Angi's page is not perfectly consistent. Its summary box says hourly rates range "from $163 to $538," which repeats the per-job range, while its table gives $50 to $100 per hour. This guide uses the table.

National ranges by job

All figures below are national, from the Angi pages linked in each row.

Job National range, 2026 Source
Install an outlet $200 to $300 Angi, electrician cost
Install a light switch $100 to $200 Angi, electrician cost
Install an outdoor outlet $150 to $260 Angi, electrician cost
Install a light fixture $155 to $955 Angi, electrician cost
Install a ceiling fan $140 to $350 Angi, electrician cost
Replace a breaker panel $520 to $2,120 Angi, electrician cost
Upgrade a panel (average $1,600) $1,200 to $2,000 Angi, panel upgrade
Install a subpanel $400 to $1,750 Angi, panel upgrade
Rewire a house $1,500 to $10,000 Angi, electrician cost
Replace knob and tube (average $24,300) $12,000 to $36,600 Angi, knob and tube
Install a home EV charger (average $967) $555 to $1,380 Angi, EV charging
Wire a hot tub (average $2,300) $1,900 to $4,200 Angi, hot tub wiring
Install a whole-house generator $1,540 to $8,740 Angi, electrician cost
Install a generator transfer switch $400 to $2,500 Angi, electrician cost

Two rows look inconsistent and are not. "Rewire a house" at $1,500 to $10,000 is Angi's general figure. Its knob-and-tube page prices a full replacement at $10 to $20 per square foot, which is how it reaches $12,000 to $36,600. Treat the knob-and-tube figure as the better guide for a whole older Akron house.

Akron's actual permit fees

Inside Akron, residential electrical permits come from the Summit County Division of Building Standards. Its published fees (form revision 03.24) are: (Summit County, Electrical Permit Application)

Residential item Summit County fee
Application fee $60
New construction $4 per 100 sq ft
Interior alterations $2 per 100 sq ft
Miscellaneous circuits $12 each
Temporary pole, service upgrade, interior or exterior lighting $40 each
Miscellaneous repairs $40
Meter pull for siding $40, no application fee
Re-inspections $30 for the 1st and 2nd, $60 for the 3rd, $80 for the 4th
State (OBBS) fee 1% of the residential subtotal

Compare that with Angi's national permit figures: $75 to $150 per permit for general work, $50 to $300 for a panel, and $100 to $200 for an EV charger. (Angi, electrician cost; Angi, panel upgrade; Angi, EV charging) Using only the published fee lines, a single service upgrade in Summit County is $100 before the 1% state fee, and adding one new circuit is $72 before the state fee. A quote that lists a much larger "permit" line deserves a question.

Skipping the permit is the expensive option. Summit County may issue a permit for work started or finished without one, at three times the normal fee. (Summit County Codified Ordinances 1305.04)

What pushes an Akron job above the national range

These factors come from the national sources, applied to what the Census says about Akron housing.

How to compare quotes

  1. Ask for the price in writing, with the permit fee as its own line.
  2. Ask which Summit County fee items the permit will include.
  3. Ask whether the price covers wall patching. Angi prices wall repair separately from the electrical work.
  4. For panel work, ask whether the meter base and service wire are included.
  5. Bundle small jobs. Angi notes that hourly minimums make one visit for several small items cheaper than several visits. (Angi, electrician cost)

Frequently asked questions

Are there Akron-specific electrician prices anywhere?

This guide found none in a published source it could check. The ranges here are national and labeled that way.

Is the Summit County permit fee the same for a homeowner?

The published schedule does not list a separate homeowner rate. (Summit County, Electrical Permit Application)

Are permit fees refundable?

The County's form says fees are payable in advance and not refundable.

Verify before you hire

Sources

  1. Angi, How Much Does an Electrician Cost
  2. Angi, panel upgrade
  3. Angi, knob and tube
  4. Angi, EV charging
  5. Angi, hot tub wiring
  6. Summit County, Electrical Permit Application
  7. Summit County Codified Ordinances 1305.04
  8. Census Reporter, ACS 2024 5-year